Dual piston deadweight testers can greatly enhance a lab?s ability to calibrate wide pressure ranges with the best accuracy. With transducers and devices under test (DUTs) which have a broad measuring range, calibration can be a lengthy process, as you must change pistons among test points to be able to calibrate its entire range.
However, a dual piston deadweight tester has a higher range piston and low range piston, that allows the technician more flexibility and efficiency in terms of calibration. This advancement comes from decades of innovation and customer interaction to locate a solution for industry needs.
Formula for pressure calculations
Because the Industrial Revolution, high accuracy pressure measurement has been a key requirement in process industries. Pressure measuring instruments like gauges were employed to measure and monitor pressure conditons. They must be calibrated against instruments of an increased amount of accuracy. Deadweight testers (also referred to as pressure balances) are high accuracy instruments used in the calibration of electronic or mechanical pressure instruments. The core component of a deadweight tester is really a precisely manufactured piston-cylinder system, onto which a mass load is applied as a way to generate the individual test points in a calibration.
The mass load is proportional to the target pressure, that is achieved through optimally graduated masses. The design of the entire calibration system, as well as the precise manufacturing of the piston and cylinder, ensure quality performance with long free-rotation time and low sink rates of the piston. With measurement uncertainties down to 0.002% of reading, deadweight testers are the golden standard in calibration.
A deadweight tester typically consists of a single piston-cylinder system. This involves mass sets to be changed in order to calibrate multiple or wide measuring ranges. This may turn into a cumbersome process, one that requires many resources. In 1953, the entity today known as DH-Budenberg pioneered the initial dual range piston-cylinder technology with two pistons housed concentrically in a single unit. DH-Budenberg was later acquired by WIKA in 2011. The initial design included 1/8 in2 (low pressure) and 1/180 in2 (ruthless) pistons housed in one unit. Using a single mass-set it was now possible to create two points of equilibrium at 55 bar (low pressure) and 550 bar (high pressure) respectively. This was followed with the release of ruthless variant which could generate pressure upto 1100 bar.
Dishonest was largely made of tool roll, and had an accuracy of 0.03 % of the pressure being measured in the standard model and 0.05 % in the ruthless model. In dual piston calibration, the strain on the low pressure piston is used in the auxiliary piston, that is directly linked to the weight carrier. When correct pressure is obtained, the piston head skirt floats within the low range or ?blue band.? To attain high pressure, the pressure is increased and the low pressure piston rises until a knife-edge on underneath flange makes a seal against the low pressure cylinder and acts because the high pressure cylinder. Because the low pressure piston will not contribute to the overall weight of the piston and weight carrier, the weight carrier accumulates the auxiliary weight to pay. When correct pressure is achieved, the piston head skirt floats within the high range or ?red band.?
This iconic, patented DH-Budenberg red and blue band piston-cylinder system was re-engineered later with both piston and cylinder components manufactured from tungsten carbide. With the refinements in pressure generation and piston manufacturing processes, dual ranges are actually available up to 1,400 bar with accuracies down to 0.006 % of reading.
These developments in dual piston technology made deadweight testers, such as DH-Budenberg?s CPB5800 Hydraulic Pressure Balance, the premier deadweight tester for industrial applications. It is especially ideal for calibrating a transducer with a wide measuring range, while maintaining the high accuracy for testing and calibration. With the use of only a single mass set and calibrating instrument, this system can automatically switch between multiple test points of high and low pressure, making pressure calibration seamless, efficient and economical.
Note
More info on our pressure balances are available on the WIKA website.