Fluid Components International’s twin alarm FLT93 Series flow swap provides an early warning alert to the potential of dry operating circumstances, cavitation and other pump points that can lead to emergency shutdowns and dear upkeep.
The FLT93 Series move swap reliably screens the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series move swap reliably screens the move and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, sudden reductions in media move charges can depart pumps vulnerable to over-heating circumstances that shutdown course of strains and require troubleshooting and fixing. The SIL2 rated instrument is meant for heavy-duty, probably hazardous course of trade environments and comes with a complete record of worldwide safety approvals.
เกจวัดแรงดันไนโตรเจน has a no shifting parts design and provides a robust scheme for pump safety with its dual alarm functionality. With Alarm 1, the switch detects a low flow scenario anywhere between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low circulate alarm is a pre-warning sign for the control system or operator who can then decide to maintain the pump running or to shut it down.
If an Alarm 2 occurs because the feed line to the pump is running dry, this would be an emergency sign to shut down the pump immediately because the bearings now see gas instead of a liquid as a heat switch media. In such situations, the temperature of the bearings might rise very fast. Using a circulate change prevents everlasting damage to the pump’s bearings.
Share