Since temperature affects the measuring accuracy of a pressure sensor, there always remains a little temperature error in the rated temperature range despite a variety of compensation measures. This error is frequently expressed in the info sheets of manufacturers of pressure sensors as temperature coefficient (abbr. TC). This coefficient describes a (linear) error, beginning with a reference point, which in most cases is room temperature.
Accordingly, Horrific at room temperature is zero and increases with increasing difference of the temperature from room temperature with the specified coefficient in linear fashion (see figure). Basically, not only the zero-point temperature coefficient (abbr. TC0), but also that of the span (TCC) must be considered individually. Cripple -point error describes the effect of temperature on the zero signal. The error of the span specifies the effect of temperature on the entire scale value. The individual temperature coefficients of zero point and of span are often specified as magnitudes, and therefore they can be either positive or negative.
If in an individual instrument the zero-point error has the same sign as the error of the span, these two temperature errors may accumulate in worst case. A typical value for the common zero-point temperature coefficient of a pressure sensor is: 0.2 % / 10 K. Link to WIKA pressure sensors.

Leave a Reply